跳转至

Net

net 采集器用于采集主机网络信息，如各网络接口的流量信息等。对于 Linux 将采集系统范围 TCP 和 UDP 统计信息。

前置条件

暂无

配置

进入 DataKit 安装目录下的 conf.d/host 目录，复制 net.conf.sample 并命名为 net.conf。示例如下：

[[inputs.net]]
  ##(optional) collect interval, default is 10 seconds
  interval = '10s'
  ##
  ## By default, gathers stats from any up interface, but Linux does not contain virtual interfaces.
  ## Setting interfaces using regular expressions will collect these expected interfaces.
  ##
  # interfaces = ['''eth[\w-]+''', '''lo''', ]
  ##
  ## Datakit does not collect network virtual interfaces under the linux system.
  ## Setting enable_virtual_interfaces to true will collect virtual interfaces stats for linux.
  ##
  # enable_virtual_interfaces = true
  ##
  ## On linux systems also collects protocol stats.
  ## Setting ignore_protocol_stats to true will skip reporting of protocol metrics.
  ##
  # ignore_protocol_stats = false
  ##

[inputs.net.tags]
# some_tag = "some_value"
# more_tag = "some_other_value"

配置好后，重启 DataKit 即可。

支持以环境变量的方式修改配置参数：

环境变量名 对应的配置参数项 参数示例
ENV_INPUT_NET_IGNORE_PROTOCOL_STATS ignore_protocol_stats true/false
ENV_INPUT_NET_ENABLE_VIRTUAL_INTERFACES enable_virtual_interfaces true/false
ENV_INPUT_NET_TAGS tags tag1=value1,tag2=value2 如果配置文件中有同名 tag，会覆盖它
ENV_INPUT_NET_INTERVAL interval 10s
ENV_INPUT_NET_INTERFACES interfaces '''eth[\w-]+''', '''lo''' 以英文逗号隔开

指标集

以下所有数据采集，默认会追加名为 host 的全局 tag（tag 值为 DataKit 所在主机名），也可以在配置中通过 [inputs.net.tags] 指定其它标签：

 [inputs.net.tags]
  # some_tag = "some_value"
  # more_tag = "some_other_value"
  # ...

net

  • 标签
标签名 描述
host 主机名
interface 网络接口名
  • 指标列表
指标 描述 数据类型 单位
bytes_recv The number of bytes received by the interface. int B
bytes_recv/sec The number of bytes received by the interface per second. int B/S
bytes_sent The number of bytes sent by the interface . int B
bytes_sent/sec The number of bytes sent by the interface per second. int B/S
drop_in The number of received packets dropped by the interface. int count
drop_out The number of transmitted packets dropped by the interface. int count
err_in The number of receive errors detected by the interface. int count
err_out The number of transmit errors detected by the interface. int count
packets_recv The number of packets received by the interface. int count
packets_recv/sec The number of packets received by the interface per second. int count
packets_sent The number of packets sent by the interface. int count
packets_sent/sec The number of packets sent by the interface per second. int count
tcp_activeopens It means the TCP layer sends a SYN, and come into the SYN-SENT state. int count
tcp_attemptfails The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. int count
tcp_currestab The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. int count
tcp_estabresets The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. int count
tcp_incsumerrors The number of incoming TCP segments in checksum error int count
tcp_inerrs The number of incoming TCP segments in error int count
tcp_insegs The number of packets received by the TCP layer. int count
tcp_insegs/sec The number of packets received by the TCP layer per second. int count
tcp_maxconn The limit on the total number of TCP connections the entity can support. int count
tcp_outrsts The number of TCP segments sent containing the RST flag. int count
tcp_outsegs The number of packets sent by the TCP layer. int count
tcp_outsegs/sec The number of packets sent by the TCP layer per second. int count
tcp_passiveopens It means the TCP layer receives a SYN, replies a SYN+ACK, come into the SYN-RCVD state. int count
tcp_retranssegs The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmittedoctets. int count
tcp_rtoalgorithm The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. int count
tcp_rtomax The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. int ms
tcp_rtomin The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. int ms
udp_ignoredmulti IgnoredMulti int count
udp_incsumerrors The number of incoming UDP datagrams in checksum error int count
udp_indatagrams The number of UDP datagrams delivered to UDP users. int count
udp_indatagrams/sec The number of UDP datagrams delivered to UDP users per second. int count
udp_inerrors The number of packet receive errors int count
udp_noports The number of packets to unknown port received. int count
udp_outdatagrams The number of UDP datagrams sent from this entity. int count
udp_outdatagrams/sec The number of UDP datagrams sent from this entity per second. int count
udp_rcvbuferrors The number of receive buffer errors. int count
udp_sndbuferrors The number of send buffer errors. int count

延伸阅读